Ocean-optics Multimode Spectrum − Lab Versions Manuel d'utilisateur télécharger pdf (Page 19)

2: Set-up and Operation

Shutting Down the Laser

Use the following procedure when you are finished using the laser and need to shut it down.

►

Procedure

1. Push the Laser On toggle switch (on the front panel) to turn the laser off. Make sure that the

Laser On LED goes off.

2. Turn the master Power key (on the rear panel) 90 degrees to the vertical “off” position. The green

System Power LED (on the front panel) goes off indicating that system power is off.

3. Disconnect the fiber or SMA cords and power cable as needed.

LASER-785-LAB-02-0409 11

1 2 ... 14 15 16 17 18 19 20 21 22

Pas de commentaire

Ocean-optics Multimode Spectrum − Lab Versions Manuel d'utilisateur Page 19